QQ交谈
产品展示
日本岛津超快速液相色谱仪Prominenece UFLC
- 公司名称：
- 更新时间：
- 所 在 地：
- 生产地址：
- 浏览次数：
- 联系方式：
- 北京伯乐生命科学发展有限公司上海办事处 （上海天崛电子科技有限公司）
- 2021-11-11 18:55:25
- 上海市
- 进口
- 1421
-
耿明查看联系方式
【简单介绍】
【详细说明】
Prominence UFLC
Your Solution for Ultra Fast/High-Throughput HPLC Analysis
Researchers demand for faster separations has highlighted the need for increased efficiency in high-speed liquid chromatography.
The direct approach is to increase the phase flow rate （linear velocity）; however,
increasing the phase flow rate in the widely used 5μm particle diameter packed column diminishes chromatographic efficiency.
As a result, two approaches have been developed:
-Use of smaller particle size packing materials-
●This approach will enable more rapid separation. However,
there will be a significant increase in backpressure on the instrument components and column due to the increased column flow resistance.
-Separation under elevated temperature-
●Higher temperature has the effect of accelerating diffusion of the species while decreasing resistance to flow in the column,
enabling better and faster separation simultaneously.
To address the backpressure issue, expensive,
specialized instruments with improved pressure capabilities for high-speed separations have been developed.
These specialized instruments, however, compromise injection performance and limit sensitivity. Consequently,
use in conventional HPLC analysis may be less efficient.
-Features-
Prominence Support for High-Speed Analysis
Utilizing standard components, Prominence supports temperature operation up to 85°C,
enabling, high-speed analysis at lower pressures, while maintaining performance/throughput levels not seen in more expensive instrument configurations.
And with these standard components, Prominence enables researchers to perform both conventional and high-speed analysis.
Prominence supports high-speed analysis through the following features:
●Low volume tubing and flow cell decrease extra-column bandspreading
●10 sec ultra-fast injections with the Prominence SIL-20 Autosampler
●Temperature capability up to 85°C
●Fast data acquisition allows for better signal tracing
These features, together with the use of a 2μm particle material column, can shorten analysis time 5- to 6-fold.
Reproducibility in High-Speed Analysis
Achieving gradient retention time reproducibility is more difficult for fast separations than in normal analysis.
The excellent pumping performance of the Prominence Pumps, with its 3nL flow rate resolution′s micro stroke delivery,
shows outstanding retention time reproducibility.
Retention time RSD values for high-speed gradient operation with Prominence HPLC are typically less than 0.1%
What is High Throughput?
The goal of Fast LC is high throughput, meaning how many samples can be analyzed per day or per hour.
In order to achieve high throughput, not only must the run time of a single analysis be shortened,
but the total cycle time of the injection sequence and run time needs to be optimized.
With Prominence UFLC components, combined with unique 2.2um packing material columns,
which generate less than half the back pressure compared to commercially available 1.8um packing material columns,
researchers can perform both conventional and high-throughput analysis at performance levels far surpassing others.
A specialized instrument is not needed
Your Solution for Ultra Fast/High-Throughput HPLC Analysis
Researchers demand for faster separations has highlighted the need for increased efficiency in high-speed liquid chromatography.
The direct approach is to increase the phase flow rate （linear velocity）; however,
increasing the phase flow rate in the widely used 5μm particle diameter packed column diminishes chromatographic efficiency.
As a result, two approaches have been developed:
-Use of smaller particle size packing materials-
●This approach will enable more rapid separation. However,
there will be a significant increase in backpressure on the instrument components and column due to the increased column flow resistance.
-Separation under elevated temperature-
●Higher temperature has the effect of accelerating diffusion of the species while decreasing resistance to flow in the column,
enabling better and faster separation simultaneously.
To address the backpressure issue, expensive,
specialized instruments with improved pressure capabilities for high-speed separations have been developed.
These specialized instruments, however, compromise injection performance and limit sensitivity. Consequently,
use in conventional HPLC analysis may be less efficient.
-Features-
Prominence Support for High-Speed Analysis
Utilizing standard components, Prominence supports temperature operation up to 85°C,
enabling, high-speed analysis at lower pressures, while maintaining performance/throughput levels not seen in more expensive instrument configurations.
And with these standard components, Prominence enables researchers to perform both conventional and high-speed analysis.
Prominence supports high-speed analysis through the following features:
●Low volume tubing and flow cell decrease extra-column bandspreading
●10 sec ultra-fast injections with the Prominence SIL-20 Autosampler
●Temperature capability up to 85°C
●Fast data acquisition allows for better signal tracing
These features, together with the use of a 2μm particle material column, can shorten analysis time 5- to 6-fold.
Reproducibility in High-Speed Analysis
Achieving gradient retention time reproducibility is more difficult for fast separations than in normal analysis.
The excellent pumping performance of the Prominence Pumps, with its 3nL flow rate resolution′s micro stroke delivery,
shows outstanding retention time reproducibility.
Retention time RSD values for high-speed gradient operation with Prominence HPLC are typically less than 0.1%
What is High Throughput?
The goal of Fast LC is high throughput, meaning how many samples can be analyzed per day or per hour.
In order to achieve high throughput, not only must the run time of a single analysis be shortened,
but the total cycle time of the injection sequence and run time needs to be optimized.
With Prominence UFLC components, combined with unique 2.2um packing material columns,
which generate less than half the back pressure compared to commercially available 1.8um packing material columns,
researchers can perform both conventional and high-throughput analysis at performance levels far surpassing others.
A specialized instrument is not needed
相关产品
- 日本岛津USF-2000型超声波疲劳试验机
- 日本岛津HMV-2型微小硬度计
- 日本岛津HMV-2AD型自动读取微小硬度计
- 日本岛津紫外可见光电二极管阵列分光光度计MultiSpec-1500型
- 日本岛津紫外可见分光光度计UVmini-1240型
- 日本岛津紫外可见分光光度计UV-1700 PharmaSpec型
- 日本岛津紫外可见近红外分光光度计SolidSpec-3700
- 日本岛津傅里叶变换红外光谱仪IRPrestige-21型
- 日本岛津FTIR用红外显微镜AIM-8800系统
- 日本岛津双波长飞点薄层扫描仪CS-9301PC型
- 日本岛津荧光分光光度计RF-5301PC型
- 日本岛津原子吸收分光光度计AA-6200型
- 日本岛津原子吸收分光光度计AA-6300型
- 日本岛津DUH-211／211S型动态超微小硬度计
- 日本岛津HMV全自动显微硬度计
- 日本岛津CFT-500D型流变仪（毛细管流变计）
- 日本岛津SIE-560型全自动引伸计
- 日本岛津SMV-300/RT型自动门尼粘度计
- 日本岛津SMX-130CT（SMX-160CT,SMX-225CT）
- 日本岛津SMX-160E-Ⅰ（SMX-160E-Ⅱ）
- 日本岛津SMX-31
- 日本岛津FI-30
- 日本岛津原子吸收分光光度计AA-6800型
- 日本岛津砷形态分析系统ASA-2SP型
- 日本岛津毛细管气相色谱仪GC-2010型
- 日本岛津气相色谱仪用工作站GCsolution
- 日本岛津气相色谱14C系列
- 日本岛津新气相色谱仪系统GC-2014
- 日本岛津高效液相色谱Prominence应用系统
- 日本岛津超快速液相色谱仪Prominenece UFLC
- 日本岛津数字式微焦X射线电视透视装置SMX-1000
- 日本岛津SMX-160GT
- 日本岛津磁悬浮涡轮分子泵
- 日本岛津液晶注入装置ALIS-100
- 日本岛津反射型液晶间隙测定装置CGS-1000
- 日本岛津PixeScope-2000/5000
- 日本岛津质量分析型便携式氦质谱检漏仪MSE-2000A
- 日本岛津质量分析型氦质谱检漏仪MSE-3200
- 日本岛津新一代高效液相色谱仪Prominence
- 日本岛津气相色谱质谱联用仪GCMS-QP2010 Plus
